Item 1 of 1

Delft Design Stories

24 October 2024

Including residents in energy hubs could solve energy poverty

Wind turbines, solar panels, batteries. We are producing, consuming and distributing energy more locally. This offers opportunities to solve challenges like energy poverty. “But if we want to create just, fair, and successful energy hubs, we must make them understandable and relevant for everyone," says researcher Abhigyan Singh.

30 August 2023

Contestable AI gives citizens more control over smart technology

The use of AI is on the rise across society, including by governments. For example, AI is used in the scan cars that drive around cities and use machine vision to monitor public space. AI increases efficiency, but can we, as citizens, trust its decisions? With Contestable AI, we design decision-making systems that allow citizens to express disagreement throughout their lifecycle. This is a way to ensure that government AI is worthy of people’s trust.

29 August 2023

Dashboard sparks the growth of urban greenery

Greenery makes cities more liveable. But how do you ensure urban greenery flourishes? Sanne Keizer devoted her graduation project to unearthing this answer, and in doing so designed a dashboard that monitors and predicts the evolution of urban greenery. "Urban greening needs more than a four-year policy period to be flourish," she says. Sanne’s project received a perfect score.

28 August 2023

Data and the transformation of design research

The rise of data technologies is changing the game for design researchers. As design moves towards complex societal challenges, design tools need to evolve by integrating the benefits of both humans and advanced technologies. For her PhD, Jiwon Jung explored how designers can work with data scientists and machine learning in developing digital health solutions, proposing that there is a lot to learn from each other.

22 March 2023

From The Start: The Early Design Bird Gets The Remanufacturing Worm

The circular economy. Sustainability. Refurbishment. Remanufacturing. Recycling. We hear these buzzwords used all the time when talking about how humanity needs to lessen its impact on the planet. For her PhD research, Nina Boorsma looked into how to get companies to make more sustainable products and found that the process needs to start early.

11 March 2023

IDE starts to beat in the heart of DHPC Quantum Computer

As of this January the Faculty of Industrial Design Engineering (IDE) has joined the Delft High Performance Computing Centre (DHPC) and the Delft Institute for Computational Science and Engineering. How can this ‘super (computing) power’ be used for design research, to advance visualisations, optimise 3-D printing techniques and solve societal issues and more? What effect could this have on the role of designers? What new areas of research could be addressed? And what implications could this have on ethical issues?

02 March 2023

Circular composites - design is the missing link

Composite materials have a lot to offer in terms of fine-tuning material properties, optimising functionality, and ensuring a long-life span. Despite those advantages, they still leave a lot to be desired when it comes to reuse and recycling. For his PhD, Jelle Joustra explored strategies for making composite materials that support a circular economy, proposing that design is the missing link.

24 February 2023

Long live the refurbished product

Products designed for a single life cycle have a huge impact on the environment. In the transition to a circular economy, designing products that go through multiple lives and retain their value could make a big difference. For her PhD, Theresa Wallner explored how designers can make it easier for consumers to choose refurbished products.

Delft Design Stories

Read the stories of researchers and students at the Faculty of Industrial Design Engineering, and discover the scientific questions on which they work and the solutions they present.

Changing the world with only four screws

The planet is heating up. The oceans are filling with plastic. These are problems that will require huge, cooperative efforts to fix. Francesco De Fazio wanted to do his part. He discovered that just moving four screws on a vacuum cleaner could make a big difference. Text: Molly Quell Toasters and malaria Originally from Italy, Francesco came to Delft to study Integrated Product Design. “Everyone at The Polytechnic University of Milan knows about TU Delft,” he says, which is where he earned his bachelor’s degree. He wanted to improve his English and focus on sustainability issues, and he felt he could do both things in the Netherlands. During his second semester Francesco set to work on the design of the Excelscope - a medical device which can detect malaria with the aid of a smartphone. He readily admits that he spent a lot of that period thinking that the challenge was too great: “It was a lot of pressure for someone who had designed toasters.” The project went on to win the Dutch national James Dyson Award in 2018. Being successful under that amount of pressure came in handy when he went on to his internship. Francesco knew that he wanted to work with a large company, where he felt he could have a bigger impact. And he knew he wanted to work with a Dutch company, which cared about sustainability. He landed a project with the largest and the most quintessentially Dutch company possible for an industrial design engineer: Philips. Green pressure from Brussels While Francesco was worried about his workload in Delft, in Brussels the European Commission was worrying about product repairability. In autumn 2019, the European Commission, as part of its push to make Europe greener, implemented regulations that would require companies to make appliances longer lasting, both by extending lifespans but also by making them easier to repair. These so-called Right to Repair regulations will go into effect in 2021. They are accompanied by a scoring system for companies to determine how easy their products are to repair. The idea is that consumer products should be easier to fix. “Together with smarter energy labels, our eco-design measures can save European consumers a lot of money, as well as help the EU reduce its greenhouse gas emissions,” says European Commissioner for Climate Action and Energy, Miguel Arias Cañete. The problem goes beyond climate change. According to the Global E-Waste Monitor, in 2016, the world created 44.7 million metric tons of e-waste, which includes items like computers, smart phones and washing machines. Only about 20% of that is recycled, with the rest going to landfills or being incinerated. As Francesco would discover, repairing something can be difficult to learn. In current product models, repair work is often time consuming and requires special tools. But surveys show that 77% of consumers in the European Union would like to repair rather than replace. Initiatives such Delft’s Repair Cafe reflect public enthusiasm for more of a make do and mend attitude. Ambitious compromises Philips wanted Francesco to look at several products and assess them for their repairability, underneath the new European Commission framework. “I thought ‘This is exciting’ but I wanted to be able to propose a tangible redesign as well,” he says. He also had another request: that he be allowed to score non-Philips products so the company would also have a sense of how they stacked up against the competition. Philips was receptive to the idea but wanted him to focus on the assessment. So, he found a highly ambitious compromise of sorts. He would get the assessment done in three months and then have three months to work on a redesign. “It cost me a lot of nights and weekends,” he admits. In the end, he selected seven vacuum cleaners - four from Philips and three from competitors - for the first part of his project. There were no guidelines for the process of testing repairability, only a scoring system from the European Commission. In the process of his thesis, he documented his procedure. More than a sum of the parts One of the most important takeaways from his research was his Disassembly Map. This allows someone to map the entire assembly and disassembly of the most important components. Francesco is currently working on an academic paper to document this process together with Professor Ruud Balkenende, which will show other companies and designers how they can do the same thing. Some of the vacuums were extremely complicated to take apart, requiring multiple tools and an extensive series of steps. Others, Francesco describes as “beautiful.” One vacuum he looked at only required the removal of three screws to access the main components. The analysis required him to disassemble and reassemble the same vacuum multiple times. He watched a lot of YouTube videos of people online disassembling vacuums to get a feel for how it was done. “There are a lot of Russian-speaking men who do this for some reason,” he says. Francesco figured out what parts were most critical and which were the most likely to break and how many steps it took to access them. Even though Philips only requested the assessment, he wanted his thesis to be about something more. The existing product design approach at Philips only partially considered repairability as part of the process. Francesco thought that if he could demonstrate the impact of a simple solution, he could convince them to put repairability as a central consideration in the design process. “Every change came with a problem,” he says. He would come up with what he thought was a simple solution, only to be told by someone else in the manufacturing chain that making that adjustment would unleash tremendous issues. As Francesco found out, vacuums must do more than being effective at removing dirt from your floor. They must, like most consumer appliances, meet safety standards. They must be able to be manoeuvred in certain ways. They can’t weigh too much. And, of course, production costs must be kept low. Solving the puzzle Using his Disassembly Map, he eventually figured out several solutions. One, however, was remarkable in its simplicity. By merely adjusting the position of four screws in the casing of one vacuum model, the entire external case of the Philip’s vacuum could be removed in a single step. In the current design, it took seven steps. Philips wasn’t the only one who was impressed with this outcome. His committee awarded him a 10 cum laude on his thesis. “Francesco's work is outstanding because it combines a thorough research approach with real-world impact. Not only did he make an extensive analysis of the repairability of 7 vacuum cleaners, leading to a new design tool; he also convinced Philips of the need to take repairabiltiy into account in their vacuum cleaners.” - Professor Conny Bakker The easier it is to get to the main components; the faster and easier products can be serviced. Francesco prefers to use the term “serviceability” rather than “repairability,” since the goal is for companies, or certified repair persons, to fix them, not the consumers. Regardless of who does the repair work, the easier the process, the less likely someone is to throw away the old appliance and buy a new one. And, if someone does want to upgrade, the easier it is to disassemble, the easier it is to recycle. That means that fewer vacuum cleaners will end up in landfills. After taking all those vacuums apart over and over, repairability is now something that de Fazio considers when buying new products. “But it’s really difficult for the consumer to know, how easy or hard it is to repair something. Unless you can find someone on YouTube who has already done it.” He would love to see mandatory labeling on products to show the level of difficulty in disassembly. Perhaps that’s a problem Francesco can work on his new role. Philips was so happy with de Fazio that they created a new position for him, as a Circular Product Designer, which he started in January 2020. Back to Home Health & Care Climate Action Urbanisation & Mobility Energy Transition Digital Society Francesco De Fazio linkedin This is a story of Industrial Design Engineering Francesco De Fazio This is a story of Industrial Design Engineering Conny Bakker +31 (0)15 27 89822 C.A.Bakker@tudelft.nl Room B-3-330 linkedin pure Bas Flipsen +31 (0)15 27 89398 s.f.j.flipsen@tudelft.nl Room 32-B-3-090 Present on: Mon-Tue-Thu-Fri "Leave tracks, no traces." linkedin pure Ruud Balkenende +31 15 27 81658 a.r.balkenende@tudelft.nl Room B-3-310 linkedin

Out of the Blue #11: How To Make the Shiny Thing Happen

Honorary TU Delft doctorate recipient Marco Steinberg talks strategic design, the opposite of death by 1000 cuts and how to make the shiny thing happen.
________
In the IDE Podcast Series ‘Out of the Blue’, Teacher of Practice Ianus Keller and PhD candidate Frithjof Wegener talk with our designers, researchers, students and teachers about their stories. Thankfully, we’re allowed to listen in.

Out of the Blue #10: Freedive with Kevin Shahbazi

IDE researcher Frithjof Wegener joins Ianus Keller for the second Freedive at the IDE 50 years jubilee, where they converse with Kevin Shahbazi on how to implement true circularity in large companies such as Philips, and Kevin’s plans for sustainability with Board of Innovation.
________
In the IDE Podcast Series 'Out of the Blue', Ianus Keller, Teacher of Practice at Industrial Design Engineering, talks with our designers, researchers, and teachers about their stories. Thankfully, we're allowed to listen in.

Out of the Blue #9: Freedive with Hester le Riche

In the first Freedive Ianus Keller speaks with Hester Le Riche at the IDE 50 years jubilee event. She’s CEO and co-founder of Active Cues on how to design for quality of life in healthcare. Their Magic Table augmented reality product allows people with Alzheimer to re-connect with their families and each other in care homes.
________
In the IDE Podcast Series 'Out of the Blue', Ianus Keller, Teacher of Practice at Industrial Design Engineering, talks with our designers, researchers, and teachers about their stories. Thankfully, we're allowed to listen in.

Positive Artificial Intelligence vibes

Willem van der Maden recently started his PhD position at Industrial Design Engineering (TU Delft), focusing on ‘Positive AI’. We caught up with him briefly to ask him about his goals at IDE and what we might expect to see come out of several AI projects of the faculty.

The Road to Schistoscope

For half a year, a team of six dedicated students worked endlessly on solving the problems around diagnosing Schistosomiasis in Nigeria. The tipping point for their project; seeing not only the eggs, but also the spine of the disease in the pictures made by their product. But before reaching this milestone, the team had to overcome many obstacles through weeks of hard work, motivation and creative problem solving. Tina Ekhtiar and Talitha Brenninkmeyer share the ins and outs of the process.

"Designed for our Future"

When I was cleaning out my archives from my student days at Industrial Design Engineering (IDE), I happened upon an interactive demo that bore an eerie resemblance to current day taxi-summoning services. Anyone who has been involved in design education, either as a teacher or a student, has probably experienced the same feeling of déjà vu.