Contact groups
Within the JMBC, exchange of expertise and experience is actively taking place in a number of contact groups on certain topical areas:
-
The objective of the contact group Multiphase Flow is to stimulate interaction and collaboration between researchers, developers, and users in the area of multiphase flow from universities, institutes and industries. This is done through organizing regular meetings (once or twice per year) aimed at getting to know each other’s activities and to learn about developments and applications of multiphase flow technology. This will provide a good forum to identify the needs of the users and to bring to the attention new possibilities for applying multiphase flow research results. Industry, a research institute or a university in turn act as host of the meetings. The program consists of a series of lectures on a specific theme and a visit of some of the local multiphase flow facilities. Examples of themes covered are: dynamic multiphase flows, multiphase flows with surface-active agents, and innovation with multiphase flow.
Contact : Dr. Y Tang (TUE), dr.ir. SG Huisman (UT), prof.dr.ir. C Poelma (TUD)
-
Computational Fluid Dynamics (CFD) has established itself as an indispensable scientific discipline at the intersection of physics, engineering, mathematics and computer science. Society relies more and more on numerical simulations, while at the same time the field becomes more and more specialized. In a series of JMBC courses the state of the art in computational fluid dynamics is presented from an introductory level to state-of-the-art methods. The aim of the contact group CFD is to bring together developers, scientific staff, PhD students and users to share new developments and experiences. To that end the CFD contact group organizes an annual meeting, which provides a platform for discussing the latest development. This event also aims to promote the interaction between CFD users from academia, industry and research institutes. Young researchers are encouraged to present their latest work during this one-day event.
Contact : Dr.ir. MI Gerritsma (TUD), prof.dr.ir. RWCP Verstappen (RUG)
-
The contact group Combustion is an informal network between the groups active in combustion research in Delft, Eindhoven, and Twente, bringing together the researchers in the Netherlands in an international context. The combustion topic is interpreted in a broad sense and covers solid, liquid and gaseous fuels, with a focus on renewable fuels.
About once every three years the contact group Combustion organizes the JMBC course on Combustion, bringing PhD students and other academic and industrial researchers to the forefront of experimental, theoretical and numerical research on fundamental and applied combustion. Since many years the JMBC groups also play an important role in the organization of the annual COMBURA symposium. This symposium is the major annual event in the Netherlands for exchange of information on combustion research and its applications. Its goal is to enhance the mutual collaboration between the different academic and industrial researchers, and to interest more industrial parties for the fundamental research on combustion.
Contact : Dr.ir. RJM Bastiaans (TUE), dr.ir. JBW Kok (UT), dr.ir. JA van Oijen (TUE)
-
The Lattice-Boltzmann schemes can be seen both as flexible and efficient solvers for macroscopic fluid equations or as particle-based simulation techniques which make close contact with the kinetic theory of gases. It is this last feature that allowed, in recent years, the partial disclosing of the huge potential of the method. The Lattice Boltzmann method has demonstrated great accuracy and performance in dealing with multiphase and multicomponent flows, from laminar to turbulent, in presence of simple or complex boundary conditions. Additionally, the method allows the study of colloidal systems, of complex fluids and of thermal flow problems. The contact group promotes the organization of educational and research events, also in synergy with other national and international organizations.
Contact : Prof.dr. F Toschi (TUE)
-
Turbulent flows are omnipresent in industrial applications and the environment. Owing to the non-linear character of the governing Navier-Stokes equations, the structure and dynamics of turbulence is complex. It is for these reasons that turbulence has been studied for already more than a century, in particular after the pioneering work of Osborne Reynolds on transition and turbulence in pipe flow. While early research focused on understanding of turbulence in single-phase flow, research on turbulence nowadays addresses a much broader class of turbulent flows such as e.g. turbulent multiphase flows, turbulent reacting flows, turbulence in supercritical fluids, etc.
The contact group “Turbulence” organizes annual meetings between researchers of the JM Burgerscentrum active in the field of turbulence with the aim to strengthen contact between them and to exchange results and experience. PhD students and other researchers are given the opportunity to present their results in an informal setting that promotes discussion. The meetings take about a day with a program consisting of typically 7-8 talks from different researchers/ groups, usually followed by a tour through the laboratory of the hosting institute and a “drinks session” at the end of the day. The program of a meeting typically covers both fundamental and applied research topics as well as the development of experimental techniques and numerical simulation methods for turbulent flows.
Contact : Dr. R Pecnik (TUD) and dr.ir. WP Breugem (TUD), Dr.ir. RJAM Stevens (UT), Dr. M Duran Matute (TUE)
-
The contact group Experimental Techniques forms a platform where experiments and experimental techniques can be shared and discussed. The main function of the contact group is to organize meetings with experimental fluid dynamics research groups, including research on turbulence, multiphase flows, granular flows and microfluidics. An important contribution of the contact group is the organization of the JMBC course on Experimental Techniques in Fluid Mechanics. The course is very popular among the JMBC members as it gives a broad overview of advanced experimental techniques commonly used in fluid mechanics laboratories.
Contact : Prof.dr.ir. M Versluis (UT), prof.dr.ir. C Poelma (TUD), dr.ir. RPJ Kunnen (TUE), dr. A Marin (UT)
-
More and more research is conducted at the interface between biology and fluid mechanics. This happens within many disciplines, ranging from physiology (for example, the interaction between blood flow and vessel walls) to aerodynamics (for example, the biofluidmechanics of flying and swimming animals). All these topics deal with the interaction between fluids and a complex deforming geometry. Therefore, they require similar experimental, numerical and analytical approaches.
One of the main challenges in this highly interdisciplinary research field is to bridge the gap between physics (fluid mechanics) and medical/biological sciences. To stimulate this, we aim to bring together researchers that work on Bio-Fluid Mechanics, by organizing seminars, workshops and courses on this topic. Although the contact group is affiliated with the JM Burgerscentrum, the participation from researchers from outside the JM Burgerscentrum is highly encouraged.
Contact: Prof.dr. S Kenjeres, Dipl.-Ing. (TUD), Prof.dr.ir. F Muijres (WUR), Dr.ir. B Borsje (UT)
-
Microfluidics
The contact group “Microfluidics” was established in 2005. The purpose of the contact group is to bring together students and postdocs interested in fluid dynamic aspects of microfluidics and give them a forum for presenting their results and exchanging ideas. Also, the contact group serves as a platform to exchange information about relevant conferences, workshops, courses, and research grant opportunities. Topics of interest include wetting and capillarity-driven flows, two-phase flow, micro-mixing, drop generation and control, emulsification, contact line dynamics, flow visualization, and measurement techniques. Attention is also given to also related applications such as microfluidic devices for medical diagnostics, water quality monitoring, and advanced cell culture systems.
Members of the contact group organize the JMBC courses “Capillarity-driven flows in microfluidics” and “Micro- and Nanofluidics”. In the latter course, the participant will learn about micro- and nanofluidic principles, technology, and applications, but also get extensive hands-on experience with designing, making, and testing microfluidic devices.
Contact : Prof.dr. F Mugele (UT), prof.dr.ir. JMJ den Toonder (TUE)